Floating art off a wall refers to having a gap from the wall to the start of the artwork. It appears as if the art is levitating or floating off the wall, and if the floating mount is not visible, it seems like it’s magic. It can look pretty cool.
The traditional devices that create floating art displays, are specific to a type of artwork (frame v frameless), can be time consuming or complicated to use, expensive.
Adhesive Float Blocks allows users to create hovering effect with artwork at a lower cost, across a broader spectrum of print types, while being very easy to use. Simply peel and stick.
The Adhesive Float Block to the right is 1″ thick, 3″ x 3″ length and width.
Strong hold adhesive system on both sides will stick to most all wall surfaces, included painted brick.
Available in thickness of 1/2″; 1″; and 2″
You may place Adhesive Float Blocks closer to center of print to make it more invisible. The adhesive is very strong and expect foam residue when removed from surface. For damage-free wall option, see re-stickable foam tape mounts.
For Adhesive Block Floaters that offer damage-free walls when removed, Re-Stickable Adhesive block folders are available at 1/2″ thick (1″ x 3″ dimension). Thicker than 1/2″ not offered due to the nature of the adhesive construction that allows it to re-stick and remove cleanly.
Acrylic panel print with Re-stickable block 1/2″ x 1″ x 3″
